15A Controlled Receptacle
NARCP-15A-120V-W-CAS
- Tamper‑resistant smart receptacle supporting 15A, 120V loads for new installs or retrofits
- Provides both manual and wireless ON/OFF control through the Casambi Bluetooth mesh
- Split‑receptacle design allows independent control of connected devices
- Zero‑crossing detection increases relay life and ensures smoother switching
- Supports a wide range of load types, including incandescent, ballast, electronic, resistive, and motor loads
- Indoor‑rated device that meets UL, FCC, and CSA safety and EMC compliance standards
This is an In-Stock Standard Item, however, please confirm availability with your Casambi Representative or Customer Service. Need more info on the product specs? The specification sheet has all the details.
FIND A CASAMBI REP NEAR YOU
DOWNLOAD SPEC SHEET
Similar products
Zone Controllers
Single Channel 0-10v Module w/ Integral Relay and 24vdc
Model Number: NAPPK DALI-0-10V-1CH-CAS
-
AC powerpack controller with 1-channel 0–10V/DALI dimming
-
Supports 20 A resistive loads and 16 A lighting loads
-
Casambi Ready with 12 V and 24 V auxiliary outputs
-
UL Listed and plenum rated
CUPOWER
Zone Controllers
DALI Controller 4000 Series
Model Number: SAL-40XX
• Integrates Wired DALI Drivers into Casambi
• Supports DALI D4i, DT6, and DT8 Standards
• DALI Driver Address Capacity (16 / 32 / 64 Max)
• Includes 130 mA Integrated DALI Bus Power Supply
Casambi
Zone Controllers
Wireless Control Phase Angle Dimmer
Model Number: CAS_FDLR05BPD
• Typical range: 50–150 ft; longer in open areas
• Supports up to two repeaters; rebroadcasts original signal
RIB Functional Devices
Zone Controllers
Single Channel Module w/ Integral Relay
Model number: PSC-WCM-450-BLE-CB
• Line Voltage Input Single Channel Module with 0-10VDC Dimming Output
• Sensor/Control Input for Relay/Load Control and 12VDC Auxiliary Output
• Switching Relay with Zero-Crossing
• Approved For Lighting And Plug Loads
mwConnect